viper vs. syclone

[Douglas Harvey <classicfloors@erols.com>]

First of all thank you for all of your help so far...
It is now thurdsay night and tomorrow is the grudge match between my
syclone and my dads Viper. 
If figured out why I was only attaining 10 pounds of boost. My idiotic
self did not get the IC pipe on corectly and it was blocking the turbo
outlet. Forgive me for my stupidity.
However the other problem still exists. When the truck is cold it starts
up fine. After a few test runs just as my confidence is building that it
is fixed under WOT the truck simply dies. TOTALLY. Then I am able to get
it to bearly start (the tack does alot of jumping around also), then
dies until it has cooled off. 
Most of you responded with a vacuum leak, I found the boot on the fuel
regulator had a little crack so I fixed it, but besides that I cant find
any other leaks. 
I purchased a scan tool and no codes are showing up. Everything seems to
be normal. Maybe someone could tell me what to look for  from the 100
different things the scan tool diagnoses
Any suggestions would be appreciated. I've got to give that VIPER a
respectable challenge. Thank you 

Doug Harvey
classicfloors@erols.com

..