Re: SHO V Sy update

[HMah414055@aol.com]

In a message dated 6/30/98 7:34:48 PM Pacific Daylight Time,
TRBLTY2@foxvalley.net writes:

> Just thought I would let you know that at Rick's house this weekend I found
>  that my IC pump was dead..  I just put an Attwood in it when I bought it
and
>  never really kept an eye on it to see if it was still working...   This
>  would explain why I pulled the SHO easily the first time I ran it and why
he
>  beat me the second and third time..  IC heat soak really robs the power
from
>  the Sy Tys so check yours often..   For stock pumps or for pumps run on the
>  stock wiring insert a paper clip from the ALDL "A" terminal to the "B"
>  terminal...  turn the ign "ON" (dont start the motor) then listen under the
>  front bumper for the pump running...  for those with the ATR pump...  turn
>  the Ign on (dont start the motor) then use a jumper from the power terminal
>  to the left of the fuel pump relay to the unused plug in the wiring harness
>  for the ATR (Sure Flow) pump and listen for the pump working....   most of
>  the ATR /  Sureflow mounting locations make it easy to hear the pump and
for
>  those that have it wired to a switch you can just switch it on...  due to
>  the fact that I dont have a temp gauge hooked to the IC water and the
>  Attwood pump is so quiet and that I never checked the pump for proper
>  operation after the initial install....  I got embarrassed by one of those
>  blue ovals..  so check those pumps and go have a nice lunch of horse meat
>  and rice....

Ivan,

The Surgeon General has determined that smoking Mustangs is actually good for
your health.  (No offense, just having some fun)

See you guys in KC.

Norman