Re: Tire Jack needed for Syclone!

[Bullyhart@aol.com]

In a message dated 97-09-04 12:10:45 EDT, barli@webtv.net (Barli) writes:

> anyway in order to jack it up I have to use the stock jack
>  first to lift it about one more inch or so to fit my 1/2 ton jack...when
>  lowering it back down I just reverse this process...
>  
>  Ku'uipo & Alan DeRego
>  '93 blue/grey Typhoon
>  #1911 in Hawaii
>  
Hey!
I used to have a slammed skyline (nissan).  In order to jack it up I built a
little "ramp" out of two blocks of wood about a foot long.  If they are
staggered (see below)  and nailed together all you have to do  is roll one
tire on the first block and then roll forward a little bit more to get up on
the second and whalah, 3 inches off the asphalt.  I hated carrying two jacks
around.  Little blocks don't make much noise.
                                                   _____________ 
                                      _______l_____________l
                                      l____________________l

Later,
Daron
'92 Ty
'91 Sy
Dayton