Re: [SYTY] Low battery volts at WOT

[Barry <btisdale@cybersol.com>]

Check the actual voltage on the ignition line and see if your scanner is 
reporting it accurately - often the scanner reads low for some reason.  My 
ALDL voltage read lower than actual; after I added several auxiliary 
grounds, the readings are the same - around 12.8 - 13.0v.

Barry - Syclone #26
Bangor, MI

At 09:49 PM 10/6/02 -0400, fernando gigliotti wrote:
>Hey list,
>Ive noticed that at WOT my truck only shows 11.8volts on the scanner.  Im 
>currently dealing with a KR problem(who isn't) , and was wondering if this 
>would cause the fuel pump to operate at a lower speed, resulting in less 
>fuel volume being sent to the injectors??  Also, would 11.8volts be enough 
>juice for the coil to fire the plugs with a sufficent spark under 
>boost.  Any ideas.....Fern Sy#477
>
>
>----------
>MSN Photos is the easiest way to share and print your photos: Click Here