RE: [ISTA] NP205 X-Fer Case..Driveline Gurus..

[Ryan Raketich <rraketic@secapl.com>]

On Thu, 1 Jun 2000, Chris Nolke wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> Ryan.... I thank GOD you are doing this about 4 months in front of
> me... :) :)

HaHaHa....just kidding, once I get my mind on something NOTHING is going
to stop me, I've been through WAY too much at this point to stop now :-)
Hopefully, I'll be ready for KC or I'm gonna be royally pissed...Ryan


> 
> chris nolke---  cnolke@drkoop.com cnolke@excite.com
> - -------------------------------------------------------------
> network geek, drkoop.com 512-583-KOOP
> 99 camaro SS 13.02@105
> 98 Volvo S70 T5-"r"
> Project Bradbury TT SBC Syclone
> http://members.tripod.com/~THE_Shantel/block2.jpg
> 
> 
> - -----Original Message-----
> From: Ryan Raketich [mailto:rraketic@secapl.com]
> Sent: Thursday, June 01, 2000 4:11 PM
> To: 91jeeper
> Cc: syty@syty.org
> Subject: Re: [ISTA] NP205 X-Fer Case..Driveline Gurus..
> 
> 
> On Thu, 1 Jun 2000, 91jeeper wrote:
> 
> > The inputs of the NP205 Xfer case are the same for Dodge (and Jeep)
> > and GM cases, however the output shaft is on the passenger side on
> > the DODGE. I also know that Ford messed around a small bit with the
> > NP205 case, not sure what side that exits on tho.. I would check
> > local wrecking yard or contact advance adapters ! They make a kit
> > to install a 350 in the S-10 blazers and Pickups and I'm sure its
> > addressed. They maybe able to give you some direction! These cases
> > were readily available in almost every late 60's and early 70's
> > truck and can be had for a reasonable price! Beware, its a heavy
> > NOISY (but extremely bulletproof) monster tho.. Consider a possible
> > chain case ?????
> > www.advanceadapters.com
> > 
> > Good Luck!!
> > Todd
> Thanks for the info Todd I will look into the different NP205's...no
> chain
> x-fer case is going to hold 1000+ LBS. of torque long term in an AWD
> Typhoon that weighs 4,000lbs and should be pulling 1.4 60 foots :-P
> 
> Ryan
> > 
> > Original Message -----
> > From: Ryan Raketich <rraketic@secapl.com>
> > To: <syty@syty.org>
> > Sent: Thursday, June 01, 2000 11:23 AM
> > Subject: [ISTA] NP205 X-Fer Case..Driveline Gurus..
> > 
> > 
> > > Ok ready for the million dollar question...has anyone actually
> > > used the NP205 transfer case?? What transmission was this
> > > with...the reason I ask is because I am currently in the process
> > > of switching over to a 4L80e transmission and a NP205 transfer
> > > case...what's the problem you ask...trans guy is stating that the
> > > front driveshaft goes on the passenger side and not the drivers
> > > side like our trucks :-( CAN I CATCH A BREAK PLEASE!!!! Okay back
> > > to reality...worse comes to worse I will have to have the front
> > > differential moved over to the passenger side...oh yeah more
> > > customization :-o anyways enlighten me please....
> > >
> > > Ryan
> > > '92 Ty No Heart No Legs....:-(
> > >
> > 
> > 
> 
> -----BEGIN PGP SIGNATURE-----
> Version: PGPfreeware 6.5.3 for non-commercial use <http://www.pgp.com>
> 
> iQA/AwUBOTbShz9SOJhCov38EQJc8QCfSz3kdrcrLehx6rhJPRffebszlPwAn2/1
> yxhSxxVFDmU9Gdjp1BL4j1WZ
> =ZlBQ
> -----END PGP SIGNATURE-----
>